pistolgear.com Logo text

PistolGear Xtractor Tool

PistolGear Xtractor Tool
Price: $12.95

If you are looking to properly clean or remove your XD or XDm extractor, make life easier and use this tool. Whether you need to replace a broken extractor or clean off the built up carbon and grime properly, this tool makes the effort of removing the extractor quick and easy.

There is a hole in the tool so that you can insert it on a keyring or secure it onto your range bag.

We have found, and we suggest, that you apply some penetrating oil around your extractor and allow it to soak for a couple hours to help with removal. This is especially important if your gun is dirty and there is some carbon build up around the extractor. 

Note: If you DO NOT remove the striker safety retaining pin from your slide, you will break the tip of the tool. You must remove the pin before attempting to lift the extractor from the slide. 



WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov

14 Product Reviews - Average rating 4.9 / 5 (Show All)

Click to review this product

THE Have-To-Have Tool

- 23rd September 2018

There is no other tool I can praise so highly and recommend to every Springfield XD owner. Even if you think you don't need it and you never disassemble your slide that far, you should have this. It makes the complete cleaning and lubing so easy that you will actually do it more often... LOVE this.

Must Have Tool

- 20th January 2018

The Xtractor Tool works better than advertised. I have 4 XD's and couldn't be happier on how easy it is now to remove the extractors for cleaning and maintenance. Thanks PistolGear !


- 20th November 2015

I cannot believe it, the extractor practically fell out, oh wait it did!
I was shocked how well this tool performed, after spending so much time trying to get the extractor out! If you own an XD you MUST get one!

I can't believe!

- 27th January 2015

I can't believe how easy is to remove the extractor with this tool!

If you have and XD and/or XDM you must have this tool.

excellent tool

- 01st January 2015

This is a must have if you own an XD(m)! I have a 3.8 in .40sw and after a few thousand rounds I needed to clean my extractor and this tool worked AMAZING for removing it. I also bought this tool over 2 years ago and it has held up very, very well. I would highly recommend the extractor tool.

Excellent extractor tool!

- 29th September 2014

Works very well make sure you remove long retaining pin that goes through firing pin safety and into extractor or the tool will NOT do it job and you will run the risk of breaking the tool.

Click to review this product