PistolGear is proud to offer the first Slam Pad specifically for the Springfield XD. What is a “Slam Pad”? A Slam Pad is a dense piece of precision cut rubber that closely matches the shape of the XD Magazine’s base pad, in order to protect the magazine from the ground during reloads and/or to add some additional length to the magazine in order to aid during reloads. Each Slam Pad has a hole in the center that will allow you to remove your magazine base pad for cleaning without having to remove your Slam Pad. Reducing the thickness of the pads may be required, depending on your specific XD model.

Compatible with ALL XD and XDm Magazines. The reason for the two holes is simple. If you own a XDm in 9x19, you will notice that the baseplate release is no longer in the center of the magazine.

Thickness: 0.375"

Can be used in conjunctions with any PistolGear Magwell. Please make sure your gun fits the box if you are shooting IDPA. Reducing the thickness of the pads may be required, depending on your specific XD model.

This dual-hole version of our Slam Pads is geared towards those looking to add a little more length to their XD or XDm models, or to better protect their magazines during a drop.

The reason for the two holes is simple. If you own a XDm in 9x19, you will notice that the baseplate release is no longer in the center of the magazine. Because of the two holes in our Slam Pad, this product will fit ALL XD magazines.

Magwell: To be used with XDm "Operator" Magwell.

Each pad includes an aggressive pressure sensitive adhesive for those who do not want to permanently mount the pads.

Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

Note: This barrel is specific to the Service length slide and will NOT fit Tactical length guns.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

This conversion barrel is specific to the XD Service model in 40SW, 357SIG or 45GAP.

What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

This conversion barrel is specific to the XD Tactical model in 40SW, 357SIG or 45GAP.

What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

This conversion barrel is specific to the newest the XDm. What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

The PistolGear "Operator" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank by purchasing expensive proprietary basepads. The funnel of the magwell increases the area by 30%, making tactical reloads both easier and smoother.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell. We suggest the use of the PistolGear "Slam Pads".

This magwell is IDPA legal and is perfect for Law Enforcement as well.

This product is for the XD 9x19 / .357SIG / .40S&W / .45GAP Models only! It will not fit on XD45ACP nor XDm Models.  This product will not fit the XD Subcompact models. Some fitting may be required.

Achtung, Gamers! The PistolGear "UnLimited" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank because you were forced into purchasing expensive proprietary basepads. The funnel of the UnLimited Magwell increases the target area by 50%; in essence doubling your target.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell.We suggest the use of the PistolGear "Slam Pads".

Note: Some fitting may be required.

Note: NOT IDPA Legal!

When Springfield Armory released the XDm, XD fans took notice, especially competitive shooters. With its higher capacity, the XDm is a fantastic gun with USPSA Limited competition. It is for this reason that we set out to design & build a magwell that will allow our beloved XDm to run with gun with are 2x+ the cost.

We are very proud of our design and the quality of this magwell. We are certain that you will be too.

Are you looking to add some extra rounds to your magazine, whether for competition or practice? If so, this may be the product for you. Made of aluminum and with a removal backplate, this rugged design allows you to install your new spring, follower and extension in a minute or less. Unlike other magazine extension on the market, you will not need to fight with this one and it will NEVER come off of your mag tube during a reload.

When this extension is added to your XD^m magazine tube, it will bring your OAL to 170mm, making is legal for USPSA Open Division.

Capacity:

• 9x19 = 28+1 (+9 rounds)
• 40S&W = 25+1 (+9 rounds)

Magazine NOT included...

Attention Limited Shooters! PistolGear is proud to offer its 140mm magazine extension, designed by gamers for gamers. Made of aluminum and with a removal backplate, this rugged design allows you to install your new spring, follower and extension in seconds. Unlike other magazine extension on the market, you will not need to fight with this one and it will NEVER come off of your mag tube during a reload.

Capacity:

• 9x19 = 24+1 (+6 rounds)
• 40S&W = 20+1 (+4 rounds)

This is a stainless steel guide for the Springfield XD^m. This rod weighs two ounces and uses the XDM's factory spring or these spring options.

Note: Unlike the stock guide rod, this rod is solid stainless steel - not hollow

Note: This Guide Rod will NOT fit XDm 3.8 models.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD Service in 9MM/40SW/357SIG/45GAP. This guide rod includes a bushing that allows you to pair the guide rod with standard 1911 springs.

Guide Rod Weight: 31.4 grams

Note: Springs sold separately. Click here for compatible spring options.

This is a stainless steel guide for the Springfield XD Tactical in 9MM/40SW/357SIG/45GAP.

Guide Rod Weight: 40.25 grams

Note: Springs sold separately. Click here for compatible spring options.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD45ACP Tactical model.

Guide Rod Weight: 2.2 ounces

Note: Springs sold separately. Click here for compatible springs!

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD^m. This rod weighs two ounces and uses the XDM's factory spring or these spring options.

Note: Unlike the stock guide rod, this rod is solid stainless steel - not hollow

Note: This Guide Rod will NOT fit XDm 3.8 models.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD Tactical in 9MM/40SW/357SIG/45GAP.

Guide Rod Weight: 40.25 grams

Note: Springs sold separately. Click here for compatible spring options.

Guide Rod sold under license from Don's Guide Rods

The PistolGear slide stop is very near and dear to our heart. We set out to build this part some time ago, looking to create a solution that would not only help your traditional XD owner, but the non-traditional owner as well.

Our design allows any XD owner, even those who lack dexterity in their thumb, or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

We believe that this part will have a great impact on all who give it a try. If you are a competition shooter (like we are), you will find this part to be fast and unobtrusive.

IDPA (ESP) LEGAL!

Click here to see a graphical review & installation instructions for the PistolGear Slide Stop

This kit is required if you are looking to maximize your hold on your XD^m. The kit include four parts to be used as you see fit, based on your needs.

The large piece is for the front and side straps. The rectangular part is for the rear strap. The two triangular pieces are for filling in the gap.

Texture: Sand

Color: Black

This conversion barrel is specific to the newest XD; the XDm. What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW) down to a smaller caliber (357SIG) for the benefit of practice and plinking.

Note: For this barrel, you can run your factory spring weight as well as your factory 40S&W magazines.

For those looking to attach a "can" or compensator onto their XD, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE USA 

For those looking to attach a "can" or compensator onto their XDM, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE US

Achtung, Gamers! The PistolGear "UnLimited" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank because you were forced into purchasing expensive proprietary basepads. The funnel of the UnLimited Magwell increases the target area by 50%; in essence doubling your target.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell. We suggest the use of the PistolGear "Slam Pads".

This product will not fit the XD Subcompact models nor XD45ACP models. Some fitting may be required.

PistolGear is proud to offer the first IDPA legal magwell to the XD^m marketplace. Tweaking our design for the benefit of an affective product that will fit the IDPA box, this magwell will make your ESP machine rock!

The PistolGear "Operator" magwell for the XD^m doubles the width of the frame funnel for the benefit of smoother tactical reloads. The magwells locks onto the frame in two locations making it rigid. The magwell is held in place by a threaded pin that replaces the factory grip insert pin, making installation easy and non-permanent. YOU DO NOT EPOXY THIS PRODUCT TO YOUR FRAME.

Note: Designed to work with the #2 grip insert.