Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

Note: This barrel is specific to the Service length slide and will NOT fit Tactical length guns.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

This conversion barrel is specific to the XD Service model in 40SW, 357SIG or 45GAP.

What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

This conversion barrel is specific to the XD Tactical model in 40SW, 357SIG or 45GAP.

What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

This conversion barrel is specific to the newest the XDm. What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

This conversion barrel is specific to the newest XD; the XDm. What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW) down to a smaller caliber (357SIG) for the benefit of practice and plinking.

Note: For this barrel, you can run your factory spring weight as well as your factory 40S&W magazines.

For those looking to attach a "can" or compensator onto their XD, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE USA 

For those looking to attach a "can" or compensator onto their XDM, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE US

Perfect for plinking, a ported barrel reduces muzzle flip and evelates the fun level. Plus, it just looks cool!

Ported barrels are made to order and have a lead-time of 2-3 weeks from date of order.

9mm Major is quickly becoming popular for many reasons. Because of its popularity, XD fans are turning their beloved XDs into Open "Race Guns". Springer Precision has heard the call from gamers and is proud to market the first compensator for the XD & XDm. We are proud to offer it to our customers.

You have the option of 1, 2 or 3 holes for the XD. All XDm Compensators will include 3 holes. One hole is good for light/minor loads. Two holes is a good option for factory ammunition. Three holes is best for 9x19 Major loads.

Thread Specifications: 1/2" x 28 (choose "Springer Precision Compensator" option if ordering PistolGear threaded barrel)