This spring pack from Canyon Creek includes the seven springs crucial to the operation of the XD. No XD owner should be without this kit. Testing has shown that this kit will reduce the stock trigger weight by as much as two pounds*.

Springer Precision has coupled their XD Sear and a host of springs for the benefit of improving the XD's stock trigger. With this pairing of parts, you are one step closer to a full-house trigger job. The results of the kit is a shorter, lighter, crisper trigger pull. Our testing shows that this setup will reduce your trigger's pre-travel by 50% and your trigger pull weight by 25% (two pounds or more).

Please note this product will not work with the XD^m.

If you reload and use "hard" primer such as Winchester or CCI, you may need to use your stock striker spring.

If you are looking to further reduce your XD's reset, you need one of these. CNC machined from 17-4 stainless steel billet, this product will give you the means to further mod your XD for gaming, offering a short & crisp trigger pull.

Note 1: To be used with the "Trigger Upgrade Kit for XD" only! Will not work with the stock sear!!

Note 2: Trigger bar must be fitted in order to operate properly.

Springer Precision has coupled their XD Sear and a host of springs for the benefit of improving the XDm's stock trigger. With this pairing of parts, you are one step closer to a full-house trigger job. The results of the kit is a shorter, lighter, crisper trigger pull. Our testing shows that this setup will reduce your trigger's pre-travel by 50% and your trigger pull weight by 25% (two pounds or more).

Kit Includes: Polished Reduced Travel Sear, Sear Spring, Trigger Spring, Striker Springer, Striker Safety Spring and LCI Spring

Springer Precision has coupled their XD Sear and a host of springs for the benefit of improving the XD's stock trigger. With this pairing of parts, you are one step closer to a full-house trigger job. The results of the kit is a shorter, lighter, crisper trigger pull. Our testing shows that this setup will reduce your trigger's pre-travel by 50% and your trigger pull weight by 25% (two pounds or more).

If you reload and use "hard" primer such as Winchester or CCI, you may need to use your stock striker spring.