PistolGear is proud to offer the first Slam Pad specifically for the Springfield XD. What is a “Slam Pad”? A Slam Pad is a dense piece of precision cut rubber that closely matches the shape of the XD Magazine’s base pad, in order to protect the magazine from the ground during reloads and/or to add some additional length to the magazine in order to aid during reloads. Each Slam Pad has a hole in the center that will allow you to remove your magazine base pad for cleaning without having to remove your Slam Pad. Reducing the thickness of the pads may be required, depending on your specific XD model.

Compatible with ALL XD and XDm Magazines. The reason for the two holes is simple. If you own a XDm in 9x19, you will notice that the baseplate release is no longer in the center of the magazine.

Thickness: 0.375"

Can be used in conjunctions with any PistolGear Magwell. Please make sure your gun fits the box if you are shooting IDPA. Reducing the thickness of the pads may be required, depending on your specific XD model.

This dual-hole version of our Slam Pads is geared towards those looking to add a little more length to their XD or XDm models, or to better protect their magazines during a drop.

The reason for the two holes is simple. If you own a XDm in 9x19, you will notice that the baseplate release is no longer in the center of the magazine. Because of the two holes in our Slam Pad, this product will fit ALL XD magazines.

Magwell: To be used with XDm "Operator" Magwell.

Each pad includes an aggressive pressure sensitive adhesive for those who do not want to permanently mount the pads.

Are you looking to add some extra rounds to your magazine, whether for competition or practice? If so, this may be the product for you. Made of aluminum and with a removal backplate, this rugged design allows you to install your new spring, follower and extension in a minute or less. Unlike other magazine extension on the market, you will not need to fight with this one and it will NEVER come off of your mag tube during a reload.

When this extension is added to your XD^m magazine tube, it will bring your OAL to 170mm, making is legal for USPSA Open Division.

Capacity:

• 9x19 = 28+1 (+9 rounds)
• 40S&W = 25+1 (+9 rounds)

Magazine NOT included...

Attention Limited Shooters! PistolGear is proud to offer its 140mm magazine extension, designed by gamers for gamers. Made of aluminum and with a removal backplate, this rugged design allows you to install your new spring, follower and extension in seconds. Unlike other magazine extension on the market, you will not need to fight with this one and it will NEVER come off of your mag tube during a reload.

Capacity:

• 9x19 = 24+1 (+6 rounds)
• 40S&W = 20+1 (+4 rounds)

Note: Mag Spacers are black.

This kit includes a new +20% extra power spring and a hardened steel locking plate. These are the only extensions for the XD45 that have locking a plate to keep the extension from popping off your magazine as it hits the ground. The spring is very high quality and are custom made to fit exactly like factory, yet give you the extra force required for proper feeding.

Note: Not intended for XDm45ACP models.

With the help of a UpLULA Magazine Loader, we were able to fit four extra rounds of 45ACP into a 13 round magazine, giving you a capacity of 17+1. Not too bad for a 45ACP!

AGP Arms +20% stronger spring for the Springfield XD45. The factory XD45 magazine spring is marginal at best. These springs are custom made for AGP Arms to exactly fit the XD45 magazine tube. It's is exactly the same dimensions as the factory spring, but with added length. These springs are an absolute must if you are running a magazine extension.
 

This ''Follower Kit'' includes a ''Grams Format'' follower and 11 coil spring. It will fit XDm magazines that measure up to 145mm in length (with base pad attached). Will work with 9MM and 40SW/357SIG Calibers.

This kit is compatible with both PistolGear (140mm) and Arrendondo extensions and will allow you to run with 19 or 20 rounds in 40SW magazines and 23 to 24 in 9mm magazines.

Note: Because of the design for the benefit of maximum capacity, your slide will not lock back when the magazine is empty.

Note: Not compatible with the XD45ACP magazines.

The extension not only gives your pinky a comfortable place to rest, but it allows for extra capacity too. The extension will allow you to add an extra round into your magazine - hence the term "plus"

Note: Not to be used with restricted capacity magazines.

This 32-round magazine is perfect for plinking and will fit the XD models in 9x19.

This magazine will not fit the XDm model.

This is a 10 round factory magazine for the Springfield XD in 9MM.

NOTE: This magazine will not fit the XD^m.

This is a 16 round factory magazine for the Springfield XD 9x19 subcompact that includes a Black sleeve.

This is a 12 round factory magazine for the Springfield XD 40S&W subcompact that includes a Black sleeve.

This is a 10 round factory magazine (short) for the XD Subcompact model.

This flush-fit magazine will allow you to run 13+1 of 9MM in your Baby XD; perfect for personal protection carry. The magazine does fit flush with the XD frame, just like the traditional 10RD magzzine does. This magazine will only fit the XD Subcompact.

Note: Pearce Grip Extension WILL fit this magazine.

This is a nine round factory magazine (short) for the XD Subcompact model.

This is a 10 round factory magazine for the Springfield XD and XDm in 45ACP. This is the full length magazine, NOT the Compact size magazine.

This is a 13 round factory magazine for the Springfield XD and XDm in 45ACP.

This is a 13 round factory magazine for the Springfield XD 45ACP compact that includes a Black sleeve.

This is a 13 round factory magazine for the Springfield XD 45ACP compact that includes a Dark Earth sleeve.

This is a 12-Round Magazine for the Springfield XD in 40S&W.

This is a 12-Round factory magazine for the Springfield XD in 357SIG.

This is a factory magazine for the Springfield XDm in 40S&W. This magazine's capacity is 16 rounds.

This is a 19 round factory magazine for the Springfield XD^m 9x19.