Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

This conversion barrel is specific to the XD Tactical model in 40SW, 357SIG or 45GAP.

What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

The PistolGear "Operator" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank by purchasing expensive proprietary basepads. The funnel of the magwell increases the area by 30%, making tactical reloads both easier and smoother.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell. We suggest the use of the PistolGear "Slam Pads".

This magwell is IDPA legal and is perfect for Law Enforcement as well.

This product is for the XD 9x19 / .357SIG / .40S&W / .45GAP Models only! It will not fit on XD45ACP nor XDm Models.  This product will not fit the XD Subcompact models. Some fitting may be required.

This is a stainless steel guide for the Springfield XD Tactical in 9MM/40SW/357SIG/45GAP.

Guide Rod Weight: 40.25 grams

Note: Springs sold separately. Click here for compatible spring options.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD Tactical in 9MM/40SW/357SIG/45GAP.

Guide Rod Weight: 40.25 grams

Note: Springs sold separately. Click here for compatible spring options.

Guide Rod sold under license from Don's Guide Rods

The PistolGear slide stop is very near and dear to our heart. We set out to build this part some time ago, looking to create a solution that would not only help your traditional XD owner, but the non-traditional owner as well.

Our design allows any XD owner, even those who lack dexterity in their thumb, or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

We believe that this part will have a great impact on all who give it a try. If you are a competition shooter (like we are), you will find this part to be fast and unobtrusive.

IDPA (ESP) LEGAL!

Click here to see a graphical review & installation instructions for the PistolGear Slide Stop

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Silver finish on this part adds a nice contrast and a little bling.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

For those looking to attach a "can" or compensator onto their XD, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE USA 

Perfect for plinking, a ported barrel reduces muzzle flip and evelates the fun level. Plus, it just looks cool!

Ported barrels are made to order and have a lead-time of 2-3 weeks from date of order.

Note: Pins are packed three to a pack. This is not a factory part.

Schematic #: 35

Achtung, Gamers! The PistolGear "UnLimited" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank because you were forced into purchasing expensive proprietary basepads. The funnel of the UnLimited Magwell increases the target area by 50%; in essence doubling your target.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell. We suggest the use of the PistolGear "Slam Pads".

This product will not fit the XD Subcompact models nor XD45ACP models. Some fitting may be required.

This spring pack from Canyon Creek includes the seven springs crucial to the operation of the XD. No XD owner should be without this kit. Testing has shown that this kit will reduce the stock trigger weight by as much as two pounds*.

Designed and used by multi-world and national practical shooting champion, Dave Sevigny, you will agree that this rear sight is the fastest available on the XD market today.

In today's market, as it applies to gun sights, it is rare that someone comes across a design that is so effective that the "pros" take notice. When Scott Warren released his idea for the perfect set of sights, it wasn't long before folks noticed the solid design  and its benefits.

9mm Major is quickly becoming popular for many reasons. Because of its popularity, XD fans are turning their beloved XDs into Open "Race Guns". Springer Precision has heard the call from gamers and is proud to market the first compensator for the XD & XDm. We are proud to offer it to our customers.

You have the option of 1, 2 or 3 holes for the XD. All XDm Compensators will include 3 holes. One hole is good for light/minor loads. Two holes is a good option for factory ammunition. Three holes is best for 9x19 Major loads.

Thread Specifications: 1/2" x 28 (choose "Springer Precision Compensator" option if ordering PistolGear threaded barrel)

Note:This is a 3-Dot Configuration, with Fiber Optic in both the front & rear.

The height of this front sight is equal to that of your stock sight, allowing you to use your existing rear sight.

This sight set includes Dawson Precision's Charger Rear Sight and the correct height Front Fiber Optic Sight.

The Charger rear sight offer a fantastic sight picture and its design allows you to charge the pistol or clear a jam with the use of just one hand, by pushing the front of the sight against a hard surface, such as a table top.

All sights meet strict quality standards before being shipped and all processes are performed, controlled, and monitored to demanding quality levels.

Note: Not to be used on XD45ACP Models.

This Blade-Tech Single Mag Pouch with Tek-Lok is perfect for both competition and daily carry. This magazine pouch will fit the Springfield XD 9/40 (classic, non-XDm) magazines as well as CZ-75 variants and similar magazines.

Note: This pouch is not compatible with the XD45ACP or XDm magazines.

This pouch is not compatible with the XD45ACP or XDm magazines.

Note 1: Button compatible with all XDs.

Note 2: Not legal for USPSA Production nor IDPA.

Note: Color of this item is BLACK

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

This pouch is not compatible with XD45ACP nor XDm magazines.

This pouch is not compatible with the XD45ACP nor XDm magazines.

This speed loader was designed to work with full-size magazines and is compatible with fullsize XD magazines. It is not compatible with XDSC magazines.

Introduction & Tutorial Video 

The Safariland Model 5188 is a compact and lightweight concealment paddle holster that allows an individual to put-on and remove the holster without have to remove his or her belt.

Color: Black

Options: XD Service RH, XD Tactical RH

So, you are looking to get into competitive shooting and are not sure what holster and magazine pouch to purchase for your XD or XDm? Don't worry, you are suffer from "new shooter syndrome", an ailment that affects all new practical shooters.  Good news, Blade-Tech is proud to offer this turn-key solution to help.

* Available in RH models only - will not fit XD45ACP models

Blade-Tech is proud to offer this new magazine pouch to XD enthusiasts. This mag pouch will work with both XD and XDm magazines (not XD45ACP mags) and is one of the fastest designs available today. USPSA Shooters rejoice!

Only available in RH at this time, to be placed on left hip.

The Model G holster for the XD and XDm has all of the feature of the WSM II models but uses reinforced plastic parts. This holster is fast and perfect for USPSA Limited and L10 shooters on a budget. Don't let the price fool you. This is a great holster!

Note: The holster is setup for right-hand but can be modified for lefties following the include instruction sheet. 

The World Shoot Model 2 is the latest version of the highly successful CR Speed Holster. It offers easier adjustment & precise positioning and includes a fully CNC Machined Versa-Hanger. It also features the new CR Speed Muzzle Platform as requested by many of our customers.

NOTE: This holster has been modified to work with XDs and XDm that have a Carver Mount and a compensator ONLY!

This dual magazine pouch by RESCOMP builds on their success of the Versa-Pouch by putting two pouches on a single platform. The belt-loop portion of this product will accommodate of belt size up to 1.65" without modification. If you have a larger belt, you can remove the separator and the loop will allow a belt width up to 2.5".

This product is perfect for both IDPA and USPSA competition.

This product is compatible with XD & XDm magazines.

• One Pouch for a multitude of different magazines.
• Available in black

This black grip sleeve by Hogue is made of soft rubber and will fit XD 9/40/357SIG models. We have installed it on the XD45ACP full-size frame and it fits OK.

Installation:

Step 1: Remove slide from XD frame

Step 2: Place Grip Sleeve in hot tap water for 60 seconds (lubrication & softens rubber)

Step 3: While wet, slowly slip the grip over the frame

If you are looking for a brighter front sight, whether it be for plinking, competition or aging eyes, this is a great option. This front sight fits all Springfield XD models and is to be used with the stock XD rear sight. There is a resin overmolded LitePipe which protects the fiberoptic rod.

HIVIZ Dovetail Sight Installation Warning!! HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be necessary for proper installation. We recommends gunsmith installation, as damage caused during installation is NOT covered by warranty.

Note: Not compatible with the XD45ACP magazines.

Grip Gloves are custom molded for each pistol model. Ideal for polymer frame handguns with no replacement grips available. Made from Pachmayr Decelerator material, Grip Gloves deliver enhanced control and will absorb recoil. The custom fit feels like an extension of your handgun grip. The ultra-soft, ultra-stretchy material makes installation a snap. No trimming, no need for soap and water. Distinctive ventilated side panels and finger grooves provide more instinctive gun orientation and a professional look. Tactical Grip Gloves are the only Slip-Ons that “fit like a glove.” 

This 32-round magazine is perfect for plinking and will fit the XD models in 9x19.

This magazine will not fit the XDm model.

An Independent test showed that the use of a Tungsten Guide Rod reduced split times on a double tap by 37% (meaning quicker follow up shots) over a stock weight guide rod.

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

Note: By design, to reduce distraction, the yellow WILL NOT glow as bright as green.

• One Pouch for a mulititude of different magazines.
• Ambidexterous construction.
• Available in black
• Belt width up to 1.5", thickness up to 0.25"

This product is compatible with XD magazines with the following calibers: 9x19, .357SIG, 40S&W, 45GAP, 45ACP

The mount that's used by more Master competitors in Glock competitions is "now" available for the Springfield XD. The CARVER Mounting system secures your red dot sight for limited dot "jump" to help improve your scores. All CARVER Mounting systems are CNC machined from high grade aircraft aluminum and consist of 5 parts that are interchangable. Competition models can be converted to Hunter models by buying optional uprights. Installation is easy, with no gunsmithing required. Front and rear sights are required to be removed for use of the Competition model due to the low positioning of the red dot sight over the slide. CARVER Hunter XD mount fits all Springfield XD handguns except the Sub-Compact model.

Note: Mount color is BLACK

The CARVER Mounting system secures your red dot sight for limited dot "jump" to help improve your scores. All CARVER Mounting systems are CNC machined from high grade aircraft aluminum and consist of 5 parts that are interchangable. Hunter models can be converted to Competition models by buying optional uprights. Installation is easy, with no gunsmithing required. Front and rear sights can remain on the slide with the use of the Hunter model.

Note: CARVER Hunter XD mount fits all Springfield XD handguns except the Sub-Compact model.

Color: BLACK

This is a 10 round factory magazine for the Springfield XD in 9MM.

NOTE: This magazine will not fit the XD^m.

Front with resin overmold in green. Rear sight, green. Front LitePipe diameter is .070"; Rear LitePipe diameter is .050"

HIVIZ sight bases are manufactured from quality steel, but due to the design, sight pushers that exert pressure on the blade will damage the sight.

HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be neccessary for proper installation.

NOTE: This set sight will fit all XD and XDm models.

This is a 13 round factory magazine for the Springfield XD 45ACP compact that includes a Black sleeve.

This is a 12-Round Magazine for the Springfield XD in 40S&W.

This is a 12-Round factory magazine for the Springfield XD in 357SIG.

This spring is compatible with the XD45ACP Tactical's stock guide rod, PistolGear's Guide Rod and the Canyon Creek Tungsten Rod for the XD45ACP Tactical.

• Reduced Power Loads: 16 Pounds
• Factory Level Loads: 18 & 20 Pounds

This spring is intended to be paired with part number PG036. The spring packaging may state "1911" but we assure you that they are compatible with the noted guide rod for the XD Tactical model (not 45ACP).

• Reduced Power Loads: 15 and 17 Pounds
• Factory Level Loads: 19 Pounds
• +P Loads: 22 & 24 Pounds