Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

Achtung, Gamers! The PistolGear "UnLimited" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank because you were forced into purchasing expensive proprietary basepads. The funnel of the UnLimited Magwell increases the target area by 50%; in essence doubling your target.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell.We suggest the use of the PistolGear "Slam Pads".

Note: Some fitting may be required.

Note: NOT IDPA Legal!

This is a stainless steel guide for the Springfield XD45ACP Tactical model.

Guide Rod Weight: 2.2 ounces

This is a stainless steel guide for the Springfield XD45ACP Tactical model.

Guide Rod Weight: 2.2 ounces

Note: Springs sold separately. Click here for compatible springs!

Guide Rod sold under license from Don's Guide Rods

The PistolGear slide stop is very near and dear to our heart. We set out to build this part some time ago, looking to create a solution that would not only help your traditional XD owner, but the non-traditional owner as well.

Our design allows any XD owner, even those who lack dexterity in their thumb, or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

We believe that this part will have a great impact on all who give it a try. If you are a competition shooter (like we are), you will find this part to be fast and unobtrusive.

IDPA (ESP) LEGAL!

Click here to see a graphical review & installation instructions for the PistolGear Slide Stop

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Silver finish on this part adds a nice contrast and a little bling.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

For those looking to attach a "can" or compensator onto their XD, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE USA 

Perfect for plinking, a ported barrel reduces muzzle flip and evelates the fun level. Plus, it just looks cool!

Ported barrels are made to order and have a lead-time of 2-3 weeks from date of order.

Note: Pins are packed three to a pack. This is not a factory part.

Schematic #: 35

This spring pack from Canyon Creek includes the seven springs crucial to the operation of the XD. No XD owner should be without this kit. Testing has shown that this kit will reduce the stock trigger weight by as much as two pounds*.

Designed and used by multi-world and national practical shooting champion, Dave Sevigny, you will agree that this rear sight is the fastest available on the XD market today.

In today's market, as it applies to gun sights, it is rare that someone comes across a design that is so effective that the "pros" take notice. When Scott Warren released his idea for the perfect set of sights, it wasn't long before folks noticed the solid design  and its benefits.

Note: Mag Spacers are black.

Springer Precision has coupled their XD Sear and a host of springs for the benefit of improving the XD's stock trigger. With this pairing of parts, you are one step closer to a full-house trigger job. The results of the kit is a shorter, lighter, crisper trigger pull. Our testing shows that this setup will reduce your trigger's pre-travel by 50% and your trigger pull weight by 25% (two pounds or more).

If you reload and use "hard" primer such as Winchester or CCI, you may need to use your stock striker spring.

Note:This is a 3-Dot Configuration, with Fiber Optic in both the front & rear.

The height of this front sight is equal to that of your stock sight, allowing you to use your existing rear sight.

This sight set includes Dawson Precision's Charger Rear Sight and the correct height Front Fiber Optic Sight.

The Charger rear sight offer a fantastic sight picture and its design allows you to charge the pistol or clear a jam with the use of just one hand, by pushing the front of the sight against a hard surface, such as a table top.

Note 1: Button compatible with all XDs.

Note 2: Not legal for USPSA Production nor IDPA.

Note: Color of this item is BLACK

This kit includes a new +20% extra power spring and a hardened steel locking plate. These are the only extensions for the XD45 that have locking a plate to keep the extension from popping off your magazine as it hits the ground. The spring is very high quality and are custom made to fit exactly like factory, yet give you the extra force required for proper feeding.

Note: Not intended for XDm45ACP models.

With the help of a UpLULA Magazine Loader, we were able to fit four extra rounds of 45ACP into a 13 round magazine, giving you a capacity of 17+1. Not too bad for a 45ACP!

AGP Arms +20% stronger spring for the Springfield XD45. The factory XD45 magazine spring is marginal at best. These springs are custom made for AGP Arms to exactly fit the XD45 magazine tube. It's is exactly the same dimensions as the factory spring, but with added length. These springs are an absolute must if you are running a magazine extension.
 

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

RH= Right Hand, LH=Left Hand

XD45ACP Compact models with 4" barrel require "Service" option.

This speed loader was designed to work with full-size magazines and is compatible with fullsize XD magazines. It is not compatible with XDSC magazines.

Introduction & Tutorial Video 

This dual magazine pouch by RESCOMP builds on their success of the Versa-Pouch by putting two pouches on a single platform. The belt-loop portion of this product will accommodate of belt size up to 1.65" without modification. If you have a larger belt, you can remove the separator and the loop will allow a belt width up to 2.5".

This product is perfect for both IDPA and USPSA competition.

This product is compatible with XD & XDm magazines.

• One Pouch for a multitude of different magazines.
• Available in black

This black grip sleeve by Hogue is made of soft rubber and will fit XD 9/40/357SIG models. We have installed it on the XD45ACP full-size frame and it fits OK.

Installation:

Step 1: Remove slide from XD frame

Step 2: Place Grip Sleeve in hot tap water for 60 seconds (lubrication & softens rubber)

Step 3: While wet, slowly slip the grip over the frame

If you are looking for a brighter front sight, whether it be for plinking, competition or aging eyes, this is a great option. This front sight fits all Springfield XD models and is to be used with the stock XD rear sight. There is a resin overmolded LitePipe which protects the fiberoptic rod.

HIVIZ Dovetail Sight Installation Warning!! HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be necessary for proper installation. We recommends gunsmith installation, as damage caused during installation is NOT covered by warranty.

Grip Gloves are custom molded for each pistol model. Ideal for polymer frame handguns with no replacement grips available. Made from Pachmayr Decelerator material, Grip Gloves deliver enhanced control and will absorb recoil. The custom fit feels like an extension of your handgun grip. The ultra-soft, ultra-stretchy material makes installation a snap. No trimming, no need for soap and water. Distinctive ventilated side panels and finger grooves provide more instinctive gun orientation and a professional look. Tactical Grip Gloves are the only Slip-Ons that “fit like a glove.” 

An Independent test conducted showed that the use of a Tungsten Guide Rod reduced split times on a double tap by 37% (meaning quicker follow up shots) over a stock weight guide rod.

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

Note: By design, to reduce distraction, the yellow WILL NOT glow as bright as green.

• One Pouch for a mulititude of different magazines.
• Ambidexterous construction.
• Available in black
• Belt width up to 1.5", thickness up to 0.25"

This product is compatible with XD magazines with the following calibers: 9x19, .357SIG, 40S&W, 45GAP, 45ACP

Front with resin overmold in green. Rear sight, green. Front LitePipe diameter is .070"; Rear LitePipe diameter is .050"

HIVIZ sight bases are manufactured from quality steel, but due to the design, sight pushers that exert pressure on the blade will damage the sight.

HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be neccessary for proper installation.

NOTE: This set sight will fit all XD and XDm models.

This is a 10 round factory magazine for the Springfield XD and XDm in 45ACP. This is the full length magazine, NOT the Compact size magazine.

This is a 13 round factory magazine for the Springfield XD and XDm in 45ACP.

This is a 13 round factory magazine for the Springfield XD 45ACP compact that includes a Black sleeve.

This is a 13 round factory magazine for the Springfield XD 45ACP compact that includes a Dark Earth sleeve.

This spring is compatible with the XD45ACP Tactical's stock guide rod, PistolGear's Guide Rod and the Canyon Creek Tungsten Rod for the XD45ACP Tactical.

• Reduced Power Loads: 16 Pounds
• Factory Level Loads: 18 & 20 Pounds