The PistolGear slide stop is very near and dear to our heart. We set out to build this part some time ago, looking to create a solution that would not only help your traditional XD owner, but the non-traditional owner as well.

Our design allows any XD owner, even those who lack dexterity in their thumb, or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

We believe that this part will have a great impact on all who give it a try. If you are a competition shooter (like we are), you will find this part to be fast and unobtrusive.

IDPA (ESP) LEGAL!

Click here to see a graphical review & installation instructions for the PistolGear Slide Stop

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Silver finish on this part adds a nice contrast and a little bling.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

Note: Pins are packed three to a pack. This is not a factory part.

Schematic #: 35

This spring pack from Canyon Creek includes the seven springs crucial to the operation of the XD. No XD owner should be without this kit. Testing has shown that this kit will reduce the stock trigger weight by as much as two pounds*.

Designed and used by multi-world and national practical shooting champion, Dave Sevigny, you will agree that this rear sight is the fastest available on the XD market today.

In today's market, as it applies to gun sights, it is rare that someone comes across a design that is so effective that the "pros" take notice. When Scott Warren released his idea for the perfect set of sights, it wasn't long before folks noticed the solid design  and its benefits.

Note: Mag Spacers are black.

Note:This is a 3-Dot Configuration, with Fiber Optic in both the front & rear.

The height of this front sight is equal to that of your stock sight, allowing you to use your existing rear sight.

This sight set includes Dawson Precision's Charger Rear Sight and the correct height Front Fiber Optic Sight.

The Charger rear sight offer a fantastic sight picture and its design allows you to charge the pistol or clear a jam with the use of just one hand, by pushing the front of the sight against a hard surface, such as a table top.

All sights meet strict quality standards before being shipped and all processes are performed, controlled, and monitored to demanding quality levels.

Note: Not to be used on XD45ACP Models.

This Blade-Tech Single Mag Pouch with Tek-Lok is perfect for both competition and daily carry. This magazine pouch will fit the Springfield XD 9/40 (classic, non-XDm) magazines as well as CZ-75 variants and similar magazines.

Note: This pouch is not compatible with the XD45ACP or XDm magazines.

This pouch is not compatible with the XD45ACP or XDm magazines.

Note 1: Button compatible with all XDs.

Note 2: Not legal for USPSA Production nor IDPA.

Note: Color of this item is BLACK

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

RH= Right Hand, LH=Left Hand

XD45ACP Compact models with 4" barrel require "Service" option.

Note: This holster is for the XD Subcompact Only.

This pouch is not compatible with XD45ACP nor XDm magazines.

This pouch is not compatible with the XD45ACP nor XDm magazines.

Blade-Tech is proud to offer this new magazine pouch to XD enthusiasts. This mag pouch will work with both XD and XDm magazines (not XD45ACP mags) and is one of the fastest designs available today. USPSA Shooters rejoice!

Only available in RH at this time, to be placed on left hip.

This dual magazine pouch by RESCOMP builds on their success of the Versa-Pouch by putting two pouches on a single platform. The belt-loop portion of this product will accommodate of belt size up to 1.65" without modification. If you have a larger belt, you can remove the separator and the loop will allow a belt width up to 2.5".

This product is perfect for both IDPA and USPSA competition.

This product is compatible with XD & XDm magazines.

• One Pouch for a multitude of different magazines.
• Available in black

If you are looking for a brighter front sight, whether it be for plinking, competition or aging eyes, this is a great option. This front sight fits all Springfield XD models and is to be used with the stock XD rear sight. There is a resin overmolded LitePipe which protects the fiberoptic rod.

HIVIZ Dovetail Sight Installation Warning!! HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be necessary for proper installation. We recommends gunsmith installation, as damage caused during installation is NOT covered by warranty.

Note: Not compatible with the XD45ACP magazines.

The extension not only gives your pinky a comfortable place to rest, but it allows for extra capacity too. The extension will allow you to add an extra round into your magazine - hence the term "plus"

Note: Not to be used with restricted capacity magazines.

This high quality, non-permanent enhancement not only allows you to get a better grip on your gun, but it adds finger ridges too. Minor trimming may be required when installed on a gun with grip safeties.

This sleeve is for compact pistols such as the XD Subcompact or Baby Glocks.

This 32-round magazine is perfect for plinking and will fit the XD models in 9x19.

This magazine will not fit the XDm model.

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

Note: By design, to reduce distraction, the yellow WILL NOT glow as bright as green.

• One Pouch for a mulititude of different magazines.
• Ambidexterous construction.
• Available in black
• Belt width up to 1.5", thickness up to 0.25"

This product is compatible with XD magazines with the following calibers: 9x19, .357SIG, 40S&W, 45GAP, 45ACP

This is a 16 round factory magazine for the Springfield XD 9x19 subcompact that includes a Black sleeve.

This is a 12 round factory magazine for the Springfield XD 40S&W subcompact that includes a Black sleeve.

This is a 10 round factory magazine (short) for the XD Subcompact model.

This flush-fit magazine will allow you to run 13+1 of 9MM in your Baby XD; perfect for personal protection carry. The magazine does fit flush with the XD frame, just like the traditional 10RD magzzine does. This magazine will only fit the XD Subcompact.

Note: Pearce Grip Extension WILL fit this magazine.

This is a nine round factory magazine (short) for the XD Subcompact model.

Front with resin overmold in green. Rear sight, green. Front LitePipe diameter is .070"; Rear LitePipe diameter is .050"

HIVIZ sight bases are manufactured from quality steel, but due to the design, sight pushers that exert pressure on the blade will damage the sight.

HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be neccessary for proper installation.

NOTE: This set sight will fit all XD and XDm models.