PistolGear is proud to offer the first Slam Pad specifically for the Springfield XD. What is a “Slam Pad”? A Slam Pad is a dense piece of precision cut rubber that closely matches the shape of the XD Magazine’s base pad, in order to protect the magazine from the ground during reloads and/or to add some additional length to the magazine in order to aid during reloads. Each Slam Pad has a hole in the center that will allow you to remove your magazine base pad for cleaning without having to remove your Slam Pad. Reducing the thickness of the pads may be required, depending on your specific XD model.

Compatible with ALL XD and XDm Magazines. The reason for the two holes is simple. If you own a XDm in 9x19, you will notice that the baseplate release is no longer in the center of the magazine.

Thickness: 0.375"

Can be used in conjunctions with any PistolGear Magwell. Please make sure your gun fits the box if you are shooting IDPA. Reducing the thickness of the pads may be required, depending on your specific XD model.

This dual-hole version of our Slam Pads is geared towards those looking to add a little more length to their XD or XDm models, or to better protect their magazines during a drop.

The reason for the two holes is simple. If you own a XDm in 9x19, you will notice that the baseplate release is no longer in the center of the magazine. Because of the two holes in our Slam Pad, this product will fit ALL XD magazines.

Magwell: To be used with XDm "Operator" Magwell.

Each pad includes an aggressive pressure sensitive adhesive for those who do not want to permanently mount the pads.

Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

Because this is a MATCH barrel and not a "drop-in" barrel, this barrel must be fitted to your firearm by a competent gunsmith.  Our barrels are all made of 416 stainless steel bar stock with a Rockwell Hardness of 40-42. Our barrels have a twist rate of 1:16".

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

Note: This barrel is specific to the Service length slide and will NOT fit Tactical length guns.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

The PistolGear Semi Drop-In Barrels are made to factory specification, with a few added twists for the benefit of improved accuracy and fit. The dimensions are over-sized in a few keys areas, yet we designed the barrels to where they will drop into approximately 90% of the XDs & HS2000s out there (hence the name semi-drop in). Unlike the XD’s stock barrel which is carbon steel, our barrels are made from 416 stainless steel; the same material used in our “Match” barrels. All barrels have a 1:16" twist and a 11 degree crown.

This conversion barrel is specific to the XD Service model in 40SW, 357SIG or 45GAP.

What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

This conversion barrel is specific to the XD Tactical model in 40SW, 357SIG or 45GAP.

What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

This conversion barrel is specific to the newest the XDm. What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW or .357SIG) down to a smaller caliber (9x19) for the benefit of practice and plinking.

To increase reliability and performance, we always suggest that you use 9x19 magazines with our 9x19 barrel as well as reduced weight spring (18# or less).

The PistolGear "Operator" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank by purchasing expensive proprietary basepads. The funnel of the magwell increases the area by 30%, making tactical reloads both easier and smoother.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell. We suggest the use of the PistolGear "Slam Pads".

This magwell is IDPA legal and is perfect for Law Enforcement as well.

This product is for the XD 9x19 / .357SIG / .40S&W / .45GAP Models only! It will not fit on XD45ACP nor XDm Models.  This product will not fit the XD Subcompact models. Some fitting may be required.

Achtung, Gamers! The PistolGear "UnLimited" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank because you were forced into purchasing expensive proprietary basepads. The funnel of the UnLimited Magwell increases the target area by 50%; in essence doubling your target.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell.We suggest the use of the PistolGear "Slam Pads".

Note: Some fitting may be required.

Note: NOT IDPA Legal!

When Springfield Armory released the XDm, XD fans took notice, especially competitive shooters. With its higher capacity, the XDm is a fantastic gun with USPSA Limited competition. It is for this reason that we set out to design & build a magwell that will allow our beloved XDm to run with gun with are 2x+ the cost.

We are very proud of our design and the quality of this magwell. We are certain that you will be too.

Are you looking to add some extra rounds to your magazine, whether for competition or practice? If so, this may be the product for you. Made of aluminum and with a removal backplate, this rugged design allows you to install your new spring, follower and extension in a minute or less. Unlike other magazine extension on the market, you will not need to fight with this one and it will NEVER come off of your mag tube during a reload.

When this extension is added to your XD^m magazine tube, it will bring your OAL to 170mm, making is legal for USPSA Open Division.

Capacity:

• 9x19 = 28+1 (+9 rounds)
• 40S&W = 25+1 (+9 rounds)

Magazine NOT included...

Attention Limited Shooters! PistolGear is proud to offer its 140mm magazine extension, designed by gamers for gamers. Made of aluminum and with a removal backplate, this rugged design allows you to install your new spring, follower and extension in seconds. Unlike other magazine extension on the market, you will not need to fight with this one and it will NEVER come off of your mag tube during a reload.

Capacity:

• 9x19 = 24+1 (+6 rounds)
• 40S&W = 20+1 (+4 rounds)

This is a stainless steel guide for the Springfield XD45ACP Tactical model.

Guide Rod Weight: 2.2 ounces

This is a stainless steel guide for the Springfield XD^m. This rod weighs two ounces and uses the XDM's factory spring or these spring options.

Note: Unlike the stock guide rod, this rod is solid stainless steel - not hollow

Note: This Guide Rod will NOT fit XDm 3.8 models.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD Service in 9MM/40SW/357SIG/45GAP. This guide rod includes a bushing that allows you to pair the guide rod with standard 1911 springs.

Guide Rod Weight: 31.4 grams

Note: Springs sold separately. Click here for compatible spring options.

This is a stainless steel guide for the Springfield XD Tactical in 9MM/40SW/357SIG/45GAP.

Guide Rod Weight: 40.25 grams

Note: Springs sold separately. Click here for compatible spring options.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD45ACP Tactical model.

Guide Rod Weight: 2.2 ounces

Note: Springs sold separately. Click here for compatible springs!

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD^m. This rod weighs two ounces and uses the XDM's factory spring or these spring options.

Note: Unlike the stock guide rod, this rod is solid stainless steel - not hollow

Note: This Guide Rod will NOT fit XDm 3.8 models.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD Service in 9MM/40SW/357SIG/45GAP. This guide rod includes a bushing that allows you to pair the guide rod with standard 1911 springs.

Guide Rod Weight: 31.4 grams

Note: Springs sold separately. Click here for compatible spring options.

Guide Rod sold under license from Don's Guide Rods

This is a stainless steel guide for the Springfield XD Tactical in 9MM/40SW/357SIG/45GAP.

Guide Rod Weight: 40.25 grams

Note: Springs sold separately. Click here for compatible spring options.

Guide Rod sold under license from Don's Guide Rods

The PistolGear slide stop is very near and dear to our heart. We set out to build this part some time ago, looking to create a solution that would not only help your traditional XD owner, but the non-traditional owner as well.

Our design allows any XD owner, even those who lack dexterity in their thumb, or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

We believe that this part will have a great impact on all who give it a try. If you are a competition shooter (like we are), you will find this part to be fast and unobtrusive.

IDPA (ESP) LEGAL!

Click here to see a graphical review & installation instructions for the PistolGear Slide Stop

This kit is required if you are looking to maximize your hold on your XD^m. The kit include four parts to be used as you see fit, based on your needs.

The large piece is for the front and side straps. The rectangular part is for the rear strap. The two triangular pieces are for filling in the gap.

Texture: Sand

Color: Black

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Silver finish on this part adds a nice contrast and a little bling.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

This conversion barrel is specific to the newest XD; the XDm. What is a conversion barrel? A conversion barrel allows you to convert your large caliber XD (.40SW) down to a smaller caliber (357SIG) for the benefit of practice and plinking.

Note: For this barrel, you can run your factory spring weight as well as your factory 40S&W magazines.

For those looking to attach a "can" or compensator onto their XD, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE USA 

For those looking to attach a "can" or compensator onto their XDM, this barrel will allow you to do so. Each barrel is made from 416 Stainless Steel and includes 1:16" twist unless selected otherwise.

Each barrel is a semi drop-in configuration and includes a thread protector. 

MADE IN THE US

Perfect for plinking, a ported barrel reduces muzzle flip and evelates the fun level. Plus, it just looks cool!

Ported barrels are made to order and have a lead-time of 2-3 weeks from date of order.

Note: Pins are packed three to a pack. This is not a factory part.

Schematic #: 35

Achtung, Gamers! The PistolGear "UnLimited" is the first magwell available for the XD that is not proprietary. What does this mean? It means that you can use your stock magazines or inexpensive extensions (e.g. AGP Arms, Arredondo) and not break the bank because you were forced into purchasing expensive proprietary basepads. The funnel of the UnLimited Magwell increases the target area by 50%; in essence doubling your target.

If you use stock magazines with this product, you will need to use an extension of sorts, since the base of the magazine will be below the funnel of the magwell. We suggest the use of the PistolGear "Slam Pads".

This product will not fit the XD Subcompact models nor XD45ACP models. Some fitting may be required.

This spring pack from Canyon Creek includes the seven springs crucial to the operation of the XD. No XD owner should be without this kit. Testing has shown that this kit will reduce the stock trigger weight by as much as two pounds*.

PistolGear is proud to offer the first IDPA legal magwell to the XD^m marketplace. Tweaking our design for the benefit of an affective product that will fit the IDPA box, this magwell will make your ESP machine rock!

The PistolGear "Operator" magwell for the XD^m doubles the width of the frame funnel for the benefit of smoother tactical reloads. The magwells locks onto the frame in two locations making it rigid. The magwell is held in place by a threaded pin that replaces the factory grip insert pin, making installation easy and non-permanent. YOU DO NOT EPOXY THIS PRODUCT TO YOUR FRAME.

Note: Designed to work with the #2 grip insert.

Designed and used by multi-world and national practical shooting champion, Dave Sevigny, you will agree that this rear sight is the fastest available on the XD market today.

In today's market, as it applies to gun sights, it is rare that someone comes across a design that is so effective that the "pros" take notice. When Scott Warren released his idea for the perfect set of sights, it wasn't long before folks noticed the solid design  and its benefits.

Note: Mag Spacers are black.

Springer Precision has coupled their XD Sear and a host of springs for the benefit of improving the XD's stock trigger. With this pairing of parts, you are one step closer to a full-house trigger job. The results of the kit is a shorter, lighter, crisper trigger pull. Our testing shows that this setup will reduce your trigger's pre-travel by 50% and your trigger pull weight by 25% (two pounds or more).

Please note this product will not work with the XD^m.

If you reload and use "hard" primer such as Winchester or CCI, you may need to use your stock striker spring.

If you are looking to further reduce your XD's reset, you need one of these. CNC machined from 17-4 stainless steel billet, this product will give you the means to further mod your XD for gaming, offering a short & crisp trigger pull.

Note 1: To be used with the "Trigger Upgrade Kit for XD" only! Will not work with the stock sear!!

Note 2: Trigger bar must be fitted in order to operate properly.

Springer Precision has coupled their XD Sear and a host of springs for the benefit of improving the XDm's stock trigger. With this pairing of parts, you are one step closer to a full-house trigger job. The results of the kit is a shorter, lighter, crisper trigger pull. Our testing shows that this setup will reduce your trigger's pre-travel by 50% and your trigger pull weight by 25% (two pounds or more).

Kit Includes: Polished Reduced Travel Sear, Sear Spring, Trigger Spring, Striker Springer, Striker Safety Spring and LCI Spring

9mm Major is quickly becoming popular for many reasons. Because of its popularity, XD fans are turning their beloved XDs into Open "Race Guns". Springer Precision has heard the call from gamers and is proud to market the first compensator for the XD & XDm. We are proud to offer it to our customers.

You have the option of 1, 2 or 3 holes for the XD. All XDm Compensators will include 3 holes. One hole is good for light/minor loads. Two holes is a good option for factory ammunition. Three holes is best for 9x19 Major loads.

Thread Specifications: 1/2" x 28 (choose "Springer Precision Compensator" option if ordering PistolGear threaded barrel)

Note:This is a 3-Dot Configuration, with Fiber Optic in both the front & rear.

The height of this front sight is equal to that of your stock sight, allowing you to use your existing rear sight.

All sights meet strict quality standards before being shipped and all processes are performed, controlled, and monitored to demanding quality levels.

Note: Not to be used on XD45ACP Models.

Note 1: Button compatible with all XDs.

Note 2: Not legal for USPSA Production nor IDPA.

Note: Color of this item is BLACK

This kit includes a new +20% extra power spring and a hardened steel locking plate. These are the only extensions for the XD45 that have locking a plate to keep the extension from popping off your magazine as it hits the ground. The spring is very high quality and are custom made to fit exactly like factory, yet give you the extra force required for proper feeding.

Note: Not intended for XDm45ACP models.

With the help of a UpLULA Magazine Loader, we were able to fit four extra rounds of 45ACP into a 13 round magazine, giving you a capacity of 17+1. Not too bad for a 45ACP!

AGP Arms +20% stronger spring for the Springfield XD45. The factory XD45 magazine spring is marginal at best. These springs are custom made for AGP Arms to exactly fit the XD45 magazine tube. It's is exactly the same dimensions as the factory spring, but with added length. These springs are an absolute must if you are running a magazine extension.
 

The Canyon Creek Tungsten Guide Rod for the XDm is nearly three times the weight of the XDm's stock guide rod. By adding this nonreciprocating mass to the muzzle end of the gun, you ease both muzzle flip and felt recoil.  An Independent test showed that the use of a Tungsten Guide Rod reduced split times on a double tap by 37% (meaning quicker follow up shots) over a stock weight guide rod.

Guide Rod Weighs 4 ounces and dimensionally similar to your stock guide rod (no bushing required).
 

This black grip sleeve by Hogue is made of soft rubber and will fit XD 9/40/357SIG models. We have installed it on the XD45ACP full-size frame and it fits OK.

Installation:

Step 1: Remove slide from XD frame

Step 2: Place Grip Sleeve in hot tap water for 60 seconds (lubrication & softens rubber)

Step 3: While wet, slowly slip the grip over the frame

If you are looking for a brighter front sight, whether it be for plinking, competition or aging eyes, this is a great option. This front sight fits all Springfield XD models and is to be used with the stock XD rear sight. There is a resin overmolded LitePipe which protects the fiberoptic rod.

HIVIZ Dovetail Sight Installation Warning!! HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be necessary for proper installation. We recommends gunsmith installation, as damage caused during installation is NOT covered by warranty.

Note: Not compatible with the XD45ACP magazines.

The extension not only gives your pinky a comfortable place to rest, but it allows for extra capacity too. The extension will allow you to add an extra round into your magazine - hence the term "plus"

Note: Not to be used with restricted capacity magazines.

Grip Gloves are custom molded for each pistol model. Ideal for polymer frame handguns with no replacement grips available. Made from Pachmayr Decelerator material, Grip Gloves deliver enhanced control and will absorb recoil. The custom fit feels like an extension of your handgun grip. The ultra-soft, ultra-stretchy material makes installation a snap. No trimming, no need for soap and water. Distinctive ventilated side panels and finger grooves provide more instinctive gun orientation and a professional look. Tactical Grip Gloves are the only Slip-Ons that “fit like a glove.” 

This high quality, non-permanent enhancement not only allows you to get a better grip on your gun, but it adds finger ridges too. Minor trimming may be required when installed on a gun with grip safeties.

This sleeve is for compact pistols such as the XD Subcompact or Baby Glocks.

This 32-round magazine is perfect for plinking and will fit the XD models in 9x19.

This magazine will not fit the XDm model.

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

Note: By design, to reduce distraction, the yellow WILL NOT glow as bright as green.

The mount that's used by more Master competitors in Glock competitions is "now" available for the Springfield XD. The CARVER Mounting system secures your red dot sight for limited dot "jump" to help improve your scores. All CARVER Mounting systems are CNC machined from high grade aircraft aluminum and consist of 5 parts that are interchangable. Competition models can be converted to Hunter models by buying optional uprights. Installation is easy, with no gunsmithing required. Front and rear sights are required to be removed for use of the Competition model due to the low positioning of the red dot sight over the slide. CARVER Hunter XD mount fits all Springfield XD handguns except the Sub-Compact model.

Note: Mount color is BLACK

The CARVER Mounting system secures your red dot sight for limited dot "jump" to help improve your scores. All CARVER Mounting systems are CNC machined from high grade aircraft aluminum and consist of 5 parts that are interchangable. Hunter models can be converted to Competition models by buying optional uprights. Installation is easy, with no gunsmithing required. Front and rear sights can remain on the slide with the use of the Hunter model.

Note: CARVER Hunter XD mount fits all Springfield XD handguns except the Sub-Compact model.

Color: BLACK

This is a 10 round factory magazine for the Springfield XD in 9MM.

NOTE: This magazine will not fit the XD^m.

This is a 16 round factory magazine for the Springfield XD 9x19 subcompact that includes a Black sleeve.

This is a 12 round factory magazine for the Springfield XD 40S&W subcompact that includes a Black sleeve.

This is a 10 round factory magazine (short) for the XD Subcompact model.

This flush-fit magazine will allow you to run 13+1 of 9MM in your Baby XD; perfect for personal protection carry. The magazine does fit flush with the XD frame, just like the traditional 10RD magzzine does. This magazine will only fit the XD Subcompact.

Note: Pearce Grip Extension WILL fit this magazine.

This is a nine round factory magazine (short) for the XD Subcompact model.

This is a 10 round factory magazine for the Springfield XD and XDm in 45ACP. This is the full length magazine, NOT the Compact size magazine.

This is a 13 round factory magazine for the Springfield XD and XDm in 45ACP.

This is a 13 round factory magazine for the Springfield XD 45ACP compact that includes a Black sleeve.

This is a 13 round factory magazine for the Springfield XD 45ACP compact that includes a Dark Earth sleeve.

This is a 12-Round Magazine for the Springfield XD in 40S&W.

This is a 12-Round factory magazine for the Springfield XD in 357SIG.

This is a factory magazine for the Springfield XDm in 40S&W. This magazine's capacity is 16 rounds.

This is a 19 round factory magazine for the Springfield XD^m 9x19.

There is little that is more frustrating than when you lose a small part during cleaning or teardown. Best to keep a couple of pins in your bag, just in case.

Three Pins per Pack.

Note: This is not a striker retainer pin. This is the pin that secures the XDm back-strap to the frame.

This is a replacment bushing for the PG035 Guide Rod.

Bushing shown within red square, Guide Rod not included.

This spring is intended to be paired with part number PG035. The spring packaging may state "1911" but we assure you that they are compatible with the noted guide rod for the XD Service model.

• Reduced Power Loads: 18 Pounds
• Factory Level Loads: 20 Pounds
• +P Loads: 22 & 24 Pounds

This spring is compatible with the XD45ACP Tactical's stock guide rod, PistolGear's Guide Rod and the Canyon Creek Tungsten Rod for the XD45ACP Tactical.

• Reduced Power Loads: 16 Pounds
• Factory Level Loads: 18 & 20 Pounds

This spring is intended to be paired with part number PG036. The spring packaging may state "1911" but we assure you that they are compatible with the noted guide rod for the XD Tactical model (not 45ACP).

• Reduced Power Loads: 15 and 17 Pounds
• Factory Level Loads: 19 Pounds
• +P Loads: 22 & 24 Pounds

Finally, springs for the Springfield XD^m that will allow you to tune your gun to your loads. These springs will work with both the stock XD^m Guide Rod as well as Don's Guide Rod for the XD^m.

• Reduced Power Loads: 14 & 16 Pounds
• Factory Level Loads: 18 Pounds
• +P Loads: 20 & 20 Pounds