The PistolGear slide stop is very near and dear to our heart. We set out to build this part some time ago, looking to create a solution that would not only help your traditional XD owner, but the non-traditional owner as well.

Our design allows any XD owner, even those who lack dexterity in their thumb, or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

We believe that this part will have a great impact on all who give it a try. If you are a competition shooter (like we are), you will find this part to be fast and unobtrusive.

IDPA (ESP) LEGAL!

Click here to see a graphical review & installation instructions for the PistolGear Slide Stop

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Silver finish on this part adds a nice contrast and a little bling.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

Dimensionally accurate to the factory part, this Striker Spring Guide is made of aluminum and will not crack or break like the stock plastic version has been known to do.

Note: Part will fit ALL XD and XDm models.

Made by Don's Guide Rods

Perfect for plinking, a ported barrel reduces muzzle flip and evelates the fun level. Plus, it just looks cool!

Ported barrels are made to order and have a lead-time of 2-3 weeks from date of order.

This spring pack from Canyon Creek includes the seven springs crucial to the operation of the XD. No XD owner should be without this kit. Testing has shown that this kit will reduce the stock trigger weight by as much as two pounds*.

Designed and used by multi-world and national practical shooting champion, Dave Sevigny, you will agree that this rear sight is the fastest available on the XD market today.

In today's market, as it applies to gun sights, it is rare that someone comes across a design that is so effective that the "pros" take notice. When Scott Warren released his idea for the perfect set of sights, it wasn't long before folks noticed the solid design  and its benefits.

Springer Precision has coupled their XD Sear and a host of springs for the benefit of improving the XDm's stock trigger. With this pairing of parts, you are one step closer to a full-house trigger job. The results of the kit is a shorter, lighter, crisper trigger pull. Our testing shows that this setup will reduce your trigger's pre-travel by 50% and your trigger pull weight by 25% (two pounds or more).

Kit Includes: Polished Reduced Travel Sear, Sear Spring, Trigger Spring, Striker Springer, Striker Safety Spring and LCI Spring

Note:This is a 3-Dot Configuration, with Fiber Optic in both the front & rear.

The height of this front sight is equal to that of your stock sight, allowing you to use your existing rear sight.

This sight set includes Dawson Precision's Charger Rear Sight and the correct height Front Fiber Optic Sight.

The Charger rear sight offer a fantastic sight picture and its design allows you to charge the pistol or clear a jam with the use of just one hand, by pushing the front of the sight against a hard surface, such as a table top.

Note 1: Button compatible with all XDs.

Note 2: Not legal for USPSA Production nor IDPA.

Note: Color of this item is BLACK

This holster is compatible with all XD calibers.

This holster is compatible with all XD calibers.

This speed loader was designed to work with full-size magazines and is compatible with fullsize XD magazines. It is not compatible with XDSC magazines.

Introduction & Tutorial Video 

Blade-Tech is proud to offer this new magazine pouch to XD enthusiasts. This mag pouch will work with both XD and XDm magazines (not XD45ACP mags) and is one of the fastest designs available today. USPSA Shooters rejoice!

Only available in RH at this time, to be placed on left hip.

This dual magazine pouch by RESCOMP builds on their success of the Versa-Pouch by putting two pouches on a single platform. The belt-loop portion of this product will accommodate of belt size up to 1.65" without modification. If you have a larger belt, you can remove the separator and the loop will allow a belt width up to 2.5".

This product is perfect for both IDPA and USPSA competition.

This product is compatible with XD & XDm magazines.

• One Pouch for a multitude of different magazines.
• Available in black

This ''Follower Kit'' includes a ''Grams Format'' follower and 11 coil spring. It will fit XDm magazines that measure up to 145mm in length (with base pad attached). Will work with 9MM and 40SW/357SIG Calibers.

This kit is compatible with both PistolGear (140mm) and Arrendondo extensions and will allow you to run with 19 or 20 rounds in 40SW magazines and 23 to 24 in 9mm magazines.

Note: Because of the design for the benefit of maximum capacity, your slide will not lock back when the magazine is empty.

If you are looking for a brighter front sight, whether it be for plinking, competition or aging eyes, this is a great option. This front sight fits all Springfield XD models and is to be used with the stock XD rear sight. There is a resin overmolded LitePipe which protects the fiberoptic rod.

HIVIZ Dovetail Sight Installation Warning!! HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be necessary for proper installation. We recommends gunsmith installation, as damage caused during installation is NOT covered by warranty.

Grip Gloves are custom molded for each pistol model. Ideal for polymer frame handguns with no replacement grips available. Made from Pachmayr Decelerator material, Grip Gloves deliver enhanced control and will absorb recoil. The custom fit feels like an extension of your handgun grip. The ultra-soft, ultra-stretchy material makes installation a snap. No trimming, no need for soap and water. Distinctive ventilated side panels and finger grooves provide more instinctive gun orientation and a professional look. Tactical Grip Gloves are the only Slip-Ons that “fit like a glove.” 

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

The brightest night sight available for the XD/XDm is available to you at a great price.

Tritium/Fiber Optic Sights

Note: By design, to reduce distraction, the yellow WILL NOT glow as bright as green.

• One Pouch for a mulititude of different magazines.
• Ambidexterous construction.
• Available in black
• Belt width up to 1.5", thickness up to 0.25"

This product is compatible with XD magazines with the following calibers: 9x19, .357SIG, 40S&W, 45GAP, 45ACP

Front with resin overmold in green. Rear sight, green. Front LitePipe diameter is .070"; Rear LitePipe diameter is .050"

HIVIZ sight bases are manufactured from quality steel, but due to the design, sight pushers that exert pressure on the blade will damage the sight.

HIVIZ dovetails are manufactured slightly oversize to allow for dovetail cut wear on used guns. Fitting will likely be neccessary for proper installation.

NOTE: This set sight will fit all XD and XDm models.

This is a factory magazine for the Springfield XDm in 40S&W. This magazine's capacity is 16 rounds.

This is a 19 round factory magazine for the Springfield XD^m 9x19.