The PistolGear base pad does not add capacity to your magazines but it does increase your magazine's overall length.
The intent of this base pad is to give you the length required in the event you are using the PistolGear Operator or UnLimited magwell. The overall length is long enough to ensure proper seating during a reload, yet short enough to still fit within the IDPA measuring box.
IDPA ESP & SSP LEGAL!
This part is CNC machined and includes aggressive tractions cuts on the sides to help extract the magazine should the magazine not drop free. The bottom of the base pad includes six (6) marking dips so you can mark your magazine as done on a playing die.
This base pads was designed to work with both 9MM and 40SW XD(M) magazines.
Removal is simple; just slightly back out the set screw with the included hex key and slide the base pad on or off of your magazine tube as required.
Weight: 29.10 grams (adds 23.40 grams / 0.83 ounces over factory mag weight)
Thickness: 0.305 inches (from bottom tube to bottom of extension)
Total Height: 0.500 inches (from top to bottom of extension)
Note: This product will not fit XD or XD Slim magazines
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov